Outdoor SMD LED Display Module, including P2.5, P3.076, P3.33, P4, P5, P6.67, P8 and P10 with the standard led module size 320mmx160mm.It is convenient for inventory.

W1 specifications

Pixel Pitch (mm)P10/8/6.67 /5/ 4/3.33/3.076/2.5
Module size320x160mm
Brightness (nits)up to 6500
Application:Fixed or Rental

Raw materials & production request

LED Module testing

The LED aging test is based on the product’s failure rate curve, which is the characteristics of the bathtub curve, and the countermeasures are adopted to improve the reliability of the product.The indoor led module aging method includes constant current aging and constant pressure aging. A constant current source is that the current is constant at any time. The frequency is not constant. That’s communication or pulsating current. The communication or pulsating current source can be described as the effective value stable, but this power supply cannot be called “constant current source”.Constant current aging is the most consistent feature of LED current operation and is the most scientific method for the aging of LED displays. Over current impact aging and manufacturers the latest clothing design school chooses an aging technique, after using the frequency adjustable, current adjustable constant current source for such aging, in order to judging the quality of the outdoor led module in a short time and can pick out the dangerous LEDs make sure the led display module working well after installation.

Aging test process of led module

  1. Check the led display module to install everything all correctly.
  2. Check whether there is a short circuit or not.
  3. Check whether the module is flat and neat.
  4. Check whether the appearance is intact or not.
  5. Use the online led control system to light up.

Make sure the testing time is continuously light for more than 72 hours

Testing function & packing

After the aging test, please check the quality control group for parameters.Test content: white balance, red, green, blue,gray gradient,video effect,text effect.after 72 hours aging test,the problem should be reported to the manager of the engineering department in a timely manner.replace or repair the broken leds. making sure all parts will be working well stably before packing.